debian sarge on kuro-box ppc

apt-get install gcc ncurses-dev
               (gcc =  binutils cpp cpp-3.3 gcc gcc-3.3)
               (ncurses-drv = libc6-dev libncurses5-dev linux-kernel-headers)

wget http://www.genbako.com/kurobox-sources-2.6.25.patch  
wget http://www.genbako.com/kurobox-section-mismatch2625.patch
wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.25.tar.bz2
tar jxpvf linux-2.6.25.tar.bz2 
cd linux-2.6.25
patch -Np1 <../kurobox-section-mismatch2625.patch
patch -Np1 <../kurobox-sources-2.6.25.patch 
cp config_kuroboxhg .config 
export ARCH=ppc 
make oldconfig 
make vmlinux 
objcopy -O binary vmlinux /boot/vmlinux.bin 
cp System.map /boot/
make modules 
sudo make ARCH=ppc modules_install 
sudo reboot 


You can use "patch" and ".config" on this site.

notice.
You must set ARCH=ppc before make.